[The Navigation Bar feature is not available in this web]
DESCRIPTION
The Compact Top2
(Top Labeller)
applies labels to the top of a product that can be laid down on a conveyor
this could be a carton, a sheet of paper, a block of cheese or a jar lid. The Top2 indicates
2 heads, the machine can be fitted with one head. The
machine can be operated in an existing line or as a Stand-alone unit,
the machine shown in the image to the right is fitted with motorised cross-feed.
EXAMPLE APPLICATIONS
Carton Labelling (Shippers to PC Software cartons)
Product/Jar/Bottle lids
Punnet Lids - Clamshell packs
Sheet or Leaflet labelling with the addition of a Sheet Feeder for auto feeding
CD - DVD Labelling
PROCESS
The standard machine consists of a 2.0M
x 900mm high conveyor using a belt 200mm wide. On
pressing
Run the conveyor starts, the products are placed onto the conveyor
manually and travel until the label/s are applied. With two labelling heads, two
labels can be applied on one product or the machine can be placed into tandem
mode where one label is set in both labelling heads and the machine operates
non-stop. The machine can be fitted with many options as listed below, such as
vacuum for holding down thin product, motorised cross-feed for frequent setup
changes.
|
Specifications |
|
|
Conveyor Length Conveyor Height Belt width Overall Dim' Power Requirements |
from 2000mm 900mm 200mm (50mm to 400mm) W2000xD700xH2000 240V |
|
Capacity |
|
|
Label Roll Diameter Product Size Label Size Label Height Label Length Throughput |
380mm - 76 Core Min' 20mm x 20mm Min' 12mm x 12mm Max' 180mm - Opt' 250mm Max' 800mm up to 400 per minute* |
* Product & Label Dependent
FEATURE LIST
Uses the reliable Compact Labelling Head and controller
Full Synchronised speeds - incorporating German Stepper Motors on the labelling heads and AC Brushless motors on all other drives
Robust, heavy duty construction – the machine is designed for years of trouble free and maintenance free productivity. No lubrication or awkward adjustments are required
Easy to set up – within a couple of minutes a new job can be set up and running, increasing productivity immediately
Simple to Operate with the build it alarms and Compact controller
Economical design incorporating high reliability and low maintenance
OPTION LIST
Additional sensors will allow Tandem (Non-Stop) operation
Conveyor Lengths - 2.5M, 3.0M, 3.5M, 4.0M
Conveyor Belt Widths - 50mm to 400mm
Hot Foil Printer or Thermal Printer – for printing use by/batch codes or bar codes
Motorised Rewind Units - using AC Brushless motors for no maintenance to rewind full roll of backing paper
Vacuum hold down belt
Blow-on attachments
Sheet Feeder for paper to CD feeding
Numerous restacking devices, eg. Egg Carton Labeller
Compact Labelling Systems Pty Ltd Unit 14b / 8 Gladstone Rd, Castle Hill. NSW 2154. Sydney. Australia
Ph: 02 9899-2144 Fax: 02 9899-2150 Int'l Ph: +61 2 9899-2144 Int'l Fax: +61 2 9899-2150